Failure Impact,Availability and Cost Analysis of PONs Based on a Network Geometric Model

Passive Optical Networks(PONs)are considered as the preferred solution for broadband fibre-based access networks.This is because PONs present low cost deployment,low energy consumption and also meet high bandwidth demands from end users.In addition,end users expect a high availability for access networks,while operators are more concerned about reducing the failure impact(number of clients affected by failures).Moreover,operators are also interested in reducing the cost of the access network.This paper provides a deep insight into the consequences that the physical topology and design decisions cause on the availability,the failure impact and the cost of a PON.In order to do that,the physical layout of the PON deployment area is approximated by a network geometric model.A PON deployed according to the geometric model is then assessed in terms of failure impact,availability and cost.This way,the effects of different design decisions and the physical layout on these three parameters are evaluated.In addition,the tradeoffs between availability,failure impact and cost caused by planning decisions and the physical topology are identified and pinpointed.     

Thermodynamic description of the viscosity of liquid solder alloys with minor Co impurities

Because of the increasing complexity and cost of experiments carried out, the data for the multi-component alloy systems have frequently been obtained by numerical modelling. It is clear that the related calculations require reliable data dealing with the pure components and binary alloy systems. Selecting the reliable data concerning the pure components from the literature, the viscosities for the SAC and (SAC)_1?x Co_x solder alloys have been calculated using different viscosity models (geometric and physical). The viscosity decreases as the amount of tin content increases in the SAC387 alloy while the addition of the cobalt to SAC387 solder results in the increasing of the viscosity. Moreover, by computing the root mean square values between theoretical and experimental viscosities, it can be concluded that the lowest value among all models is that of obtained by Kaptay equation.     

基于非线性梁理论的有限质点法

有限质点法是以向量式力学为基础,用有限数量的质点来模拟结构的变形行为,质点的运动由牛顿运动定律来计算。在有限质点法中,质点通过构件相连,构件约束着质点的运动,并且其内力由质点的运动变量来描述。基于向量式力学的基本思想和非线性梁理论,提出了一种新的有限质点法,该方法在共旋单元坐标系中描述梁的非线性变形。以空间梁系结构为例,推导了计算构件内力的非线性公式,并考虑了弯扭耦合变形。通过两个连续欧拉角的变换公式得到共旋坐标系的旋转矩阵。与传统的有限质点法相比,本文提出的方法避免了刚体虚转动分析。通过四个结构的数值求解,验证了本文方法在计算结构大变形响应时具有较高的精度。     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

Some results on regularity in vector optimization

In this paper we suggest an approach to regularity in, vector optimization which extends the one given in [9]; some necessary or sufficient regularity conditions are given for a wide class of nondifferentiable vector optimization problems which embraces the convex ones.     

Optimality theory for semi-infinite linear programming ∗

This paper presents an exhaustive approach to optimality theory in semi-infinite linear programming, placing a special emphasis on generality. After surveying optimality conditions for general problems, a detailed analysis is made of problems in which the coefficients are continuous functions of a parameter which varies on a compact set, adopting a feasible directions approach. Lastly, the case of analytical coefficients over an interval is considered in some detail.     

实现均匀照度光伏聚光镜设计

为满足聚光光伏系统的聚光需求,解决传统点聚焦式聚光光伏系统中聚焦光斑不均匀、径长比过大和聚光比较小的缺点,在不增加二次匀光器件的前提下,设计了径长比小、聚焦光斑相对均匀、聚光比高的聚光光伏系统。根据几何光学柯勒照明原理、等光程原理和反射定律,通过数值求解等光程方程组获得聚光镜各个面型的轮廓曲线。利用TracePro软件对所设计的聚光系统进行光线追迹模拟,结果表明:在聚光比为725的情况下,聚焦光斑最大照度仅为太阳照度的2300倍,是点聚焦情况下的1/10左右,系统的径长比为0.3,接收角为0.72°。系统设计实现了结构紧凑,聚光性能高的设计目标,为高倍聚光光伏系统的小型化,简单化提供了一种有效的解决途径。